For Optimal Use:
1. Please use the standard battery cables we sent,And the spare fuses in the package are just used when the original ones are burned by accident.
2. Please do NOT connect the inverter with the grid power, and a reverse connection of positive and negative is also forbidden.
3. Please do NOT overload. If your applications are inductive loads, please choose the inverters whose continuous power is 3-7 times higher than the watts of your appliances. such as fridge, icebox, drill, washing machine, water pump, microwave oven, oven, vacuum cleaner, hair dryer, etc. those with motor inside.
4. Please make sure the constant power of our inverter meets your need before order, or consult us for more details.
1.Always make sure that the total rated power of the connected devices is 2000W.
2.Always tighten the Positive (+) and Negative (-) terminals when the inverter is in use otherwise a loose connection can overheat due to poor contact.
3.Avoid placing the inverter in a location that receives prolonged direct sunlight or near to heat sensitive materials as the inverter can become warm during use.
More details and tips:
- • Connect the inverter to a battery, and plug your AC devices into the inverter
- • Run most of capacitive/inductive/resistive loads with improved program
- • Please do not leave the power inverter in the ON position while your car is off.
- • Disconnect the positive battery terminal before doing any wiring to the inverter
- • Do not let the inverter into sunlight directly, keep it in cool environment
Package includes
- 1 x Power Inverter
- 2 x Crimper
- 4 x Fuse(50A)
- 1 x User Manual
DC Input Voltage |
12V |
Output Waveform |
Pure Sine Wave |
Output Continuous Power |
2000 Watt |
Surge Power |
4000 Watts (< 1 second) |
DC Input Voltage |
12V |
AC Output Voltage |
110V ±5% 60Hz |
USB Charge Port |
5V, 3.1A |
Sockets |
3 X AC Type B outlets,4 X 3.1A USB ports |
Input Voltage Range |
DC 11V - 15V |
Input Low-Voltage Alarm |
DC 10V ±0.5V |
Under-Voltage Cut-Off Voltage |
DC 9V ±0.5V |
Input Over-Voltage Cut-Off Voltage |
DC 15.5V |
Thermal-Shutdown |
> 167°F (> 75℃) |
Efficiency |
> 88% |
No-load Current (Stand-by) |
<1.6 Amps |
Protection |
Overload / Short Circuit / Over heat / Reverse Polarity / Under/Over Voltage |
THD |
< 5% (Linear load) |
Certificate |
FCC |
Built-in Cooling Fan |
Temperature controlled fan |
Weight |
8.11 pounds |
Dimensions |
15.9 x 6.2 x 3.5 inches |
Battery Cable |
20 inch / 510 mm |